Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

OBi110 Configuration

#1
Navigate to "System Management --> Network Settings"

   

As you see from the screen capture, you need only to enter the "Local Time Zone" -- and this isn't critical to the functioning of the Obi-110 with FPL. It does help if you care about accurate call logs.

Click on "Submit" and you will be prompted to reboot the OBi-110. Go ahead and do so as it takes less than 30 seconds.

If prompted, log in to the web configuration for the OBi-110: http://192.168.0.188 using the default admin user name and password
Navigate to "Service Providers --> ITSP Profile A --> General"

   

As you see from the screen capture, you need only to enter the "ITSP Name" Please confirm that "SignalingProtocol" shows "SIP" as the Default.

Click on "Submit" and you will be prompted to reboot the OBi-110. Go ahead and do so.

If prompted, log in to the web configuration for the OBi-110: http://192.168.0.188 using the default admin user name and password
Navigate to "Service Providers --> ITSP Profile A --> SIP"


   

As you see from the screen capture above, you need only to enter the "ProxyServer" name. Enter "voip.carrier.name.com" without the quotes.
Click on "Submit" and you will be prompted to reboot the OBi-110. Go ahead and do so.


If prompted, log in to the web configuration for the OBi-110: http://192.168.0.188 using the default admin user name and password
Navigate to "Voice Services --> SP1 Service --> SIP Credentials"


   

As you see from the screen capture, you need to enter:
1. The "AuthUserName" which should be your FPL Telephone Number
2. The "AuthPassword" which is the SIP "key" you purchased for $56.50
3. The "Caller ID Name" which is good phone etiquette. The field allows -- and the OBi-110 transmits -- lowercase text.
Note: If you want to block your ID you can do so on a one-off (*67) or persistent basis (*81)

Click on "Submit" and you will be prompted to reboot the OBi-110. Go ahead and do so.

If prompted, log in to the web configuration for the OBi-110: http://192.168.0.188 using the default admin user name and password
Navigate to "Physical Interfaces --> PHONE Port"

   

As you see from the screen capture above, you only need to change the value for "PrimaryLine" to "SP1 Service" 

Click on "Submit" and you will be prompted to reboot the OBi-110. Go ahead and do so.




Make a Call Using Your Phone  Big Grin




Quote:Credit Goes To:

https://freephonelinesetup.blogspot.ca/2...i-obi.html
Reply
Thanks given by:




Possibly Related Threads...
Thread Author Replies Views Last Post
  Snom m3 Configuration funkytown 0 316 01-27-2017, 10:20 PM
Last Post: funkytown
  ZoomSS Configuration funkytown 0 336 01-27-2017, 06:08 PM
Last Post: funkytown
  Linksys Sipura Configuration funkytown 0 314 01-27-2017, 05:57 PM
Last Post: funkytown
  Linksys RT31P2 Configuration funkytown 0 313 01-27-2017, 05:08 PM
Last Post: funkytown
  YEALINK T22P Configuration funkytown 0 267 01-27-2017, 04:41 PM
Last Post: funkytown
  Panasonic KX-TGP551 Configuration funkytown 0 308 01-27-2017, 04:37 PM
Last Post: funkytown
  GXP 2100 Configuration funkytown 0 286 01-27-2017, 04:31 PM
Last Post: funkytown
  Linksys RTP300 Configuration funkytown 0 290 01-27-2017, 04:27 PM
Last Post: funkytown
  Grandstream HT286 Configuration funkytown 0 317 01-27-2017, 04:14 PM
Last Post: funkytown
  Grandstream HT503 Configuration funkytown 0 333 01-27-2017, 02:24 AM
Last Post: funkytown



Users browsing this thread: 1 Guest(s)